Skip to content

Evominix F

4÷20mA programmable temperature transmitter with metallic body and Ø6mm stem tapered to 4.4mm
PC-configurable temperature transmitter with integrated probe in a single stainless steel device. Different type of process connections can be welded on the system. It comes in a metallic IP67 body with M12 output connection. It is particularly suited for food, chemical and pharmaceutical industry.

SKU: EVOXF Category:

Need Help?

Get in touch with
Jacopo Baronio

Jacopo Baronio


+39 0372 441220

We will get back to you within 2 business days






Electrical technical data
PCB operating temperature
-40 ÷85°C
Operating humidity
0 ÷100%
According to EN 61326-1:2013
Power supply
5.5 ÷32 Vdc (polarity protected)
Input/Output insulation
Electronic board input
4-wire RTD Pt100
PCB input range
From -50°C to +500°C
4÷20 mA
20÷4 mA
Permitted load
840Ω @ 24 Vdc [Rload= (Vsupply. – 5.5) / 0.022]
Sensor break or short-circuit monitoring
According to NAMUR NE43, selectable between:
Upper scale (> 21.0 mA)
Lower scale (< 3,6 mA)
Maximum value between ±0.1°C and ±0.1% of span
Temperature influence (*)
(*) deviation from 20°C
Maximum value between ±0,3°C/25°C and ±0,3% of span/25°C
Long-term stability
Maximum 0.1% of span per year
Linear error
Range configurations
It is possible set the device by EVOMINI SET configuration kit (it is needed a PC with OS Windows).
Minimum span
Sensor error compensation
(±5°C) over two points
Sensor input signal filter (*)
(*) time to reach 90% of signal
Configurable from 0.4 to 9.4 seconds
Factory default
(4÷20)mA output
Range (0÷150)°C
Sensor break >21mA
Sensor short-circuit <3.6mA
Maximum working barometric pressure of the sensing element
100bar Max. (‘A’ zone)
International protection marking (*)
(*) According to IEC 60529
Connection body material
AISI 316L Stainless Steel
Stem length L
150 mm
Other lenghts availabloe on request
Sheath diameter d
Ø6 tapered a Ø4.4
Process connection (*)
(*) Thread STANDARDS (CYL. GAS in accordance with UNI-ISO 228) (CON. GAS in accordance with UNI-ISO 7-1) (NPT in accordance with ANSI B 1.20.1)
1/4″ GAS CIL
1/4″ NPT
male thread G 1/2″UNI ISO 228
1/2″ NPT
CLAMP 3/4″
CLAMP 1 1/2″
DIN11851 DN25
Type of connector
male 4-pin connector with M12x1 metal screw lock (in accordance with IEC 61076-2-101 STANDARDS)
Pt100 sensor accuracy
Class A up to 300°C according to IEC 751
Response time
<5s (according to IEC 751)
Stating symbol “SEE MANUAL”, marking symbol “CE”, part number, Week / Year of production, power supply range, pinout and serial number
On request adjustment on 1 or 2 points
Extension cable in TPE with overmolded M12 connector (IP67).
Available cable lengths: (3, 8 or 12)m (others on request)