EVOXTP

PC-configurable compact temperature transmitter with integrated probe and 1/8″ process connection. It comes in a robust IP67 casing with M12 output connection. It is particularly suited for measurements in fluids up to 110°C.

SKU: EVOXTP Category:

Need Help?

Get in touch with

Pasquale Giglio

Pasquale Giglio

enquiry@italcoppie.com

+39 0372 441220

We will get back to you within 2 business days

Electrical technical data
PCB operating temperature
-40 ÷85°C
Operating humidity
0 ÷100%
EMC
According to EN 61326-1:2013
Power supply
5.5 ÷32 Vdc (polarity protected)
Input/Output insulation
None
Electronic board input
4-wire RTD Pt100
PCB input range
From -50°C to +110°C
Signal
4÷20 mA
20÷4 mA
Permitted load
840Ω @ 24 Vdc [Rload= (Vsupply. – 5.5) / 0.022]
Sensor break or short-circuit monitoring
According to NAMUR NE43, selectable between:
Upper scale (> 21.0 mA)
Lower scale (< 3,6 mA)
Accuracy
Maximum value between ±0.1°C and ±0.1% of span
Effect of temperature (*)
(*) deviation from 20°C
Maximum value between ±0,3°C/25°C and ±0,3% of span/25°C
Long-term stability
Maximum 0.1% of span per year
Linear error
Negligible
Range configurations
It is possible set the device by EVOMINI SET configuration kit (it is needed a PC with OS Windows).
Minimum span
20°C
Sensor error compensation
(±5°C) over two points
Sensor input signal filter (*)
(*) time to reach 90% of signal
Configurable from 0.4 to 9.4 seconds
Factory default
(4÷20)mA output
Range (0÷100)°C
Sensor break >21mA
Sensor short-circuit <3.6mA
International protection marking (*)
(*) According to IEC 60529
IP67
Connection body material
THERMOPLASTIC
Pt100 sensor accuracy
Class A up to 300°C according to IEC 751
Stem length L
13 mm
24 mm
Sheath diameter d
Ø 3 mm
Weight
20g (L=13mm)
21g (L=24mm)
Process connection (*)
(*) Thread STANDARDS (CYL. GAS in accordance with UNI-ISO 228) (CON. GAS in accordance with UNI-ISO 7-1) (NPT in accordance with ANSI B 1.20.1)
1/8″ GAS CIL. sec. UNI-ISO 228
1/8″ NPT
Type of connector
male 4-pin connector with M12x1 metal screw lock (in accordance with IEC 61076-2-101 STANDARDS)
Response time
<3.5s (according to IEC 751)
Marking
Stating symbol “SEE MANUAL”, marking symbol “CE”, part number, Week / Year of production, power supply range, pinout and serial number
Option
On request adjustment on 1 or 2 points
Extension cable in TPE with overmolded M12 connector (IP67).
Available cable lengths: (3, 8 or 12)m (others on request)